Hood S-8000 Series

14,800 pounds @ 10 feet radius

Hood S-8000 Series

Standard boom length 23 feet. Optional boom lengths available up to 27 feet
Main and knuckle boom sections are fabricated high tensile steel and reinforced at all stress points
3” diameter pivot pins made from high strength yield steel

Hood S-8000 Series

18” square pivoting pad size
3-1/2” bore x 40” stroke x 2” rod cylinders
Wide fold out stabilizers individually controlled from operators’ seat with a 14’ wide spread at ground level
Automatic cylinder load locks for maximizing stability on uneven terrain


Main cylinder - 6" bore x 42" stroke x 2-1/2" rod fabricated heavy wall tubing barrel
Knuckle cylinder - 6" bore x 30" stroke x 2-1/2" rod fabricated heavy wall tubing barrel
Hydraulic joystick servo system controls
On demand open loop piston pump operating at 3,900 PSI allowing simultaneous operations
62 gallon loader frame mounted or truck mounted hydraulic reservoir with 10 micron return line filters
Hydraulic oil cooler
4-wire reinforced braided hoses in all pressure applications
High pressure tubing used in non-flex areas

Continuous rotation 10 port pressure manifold
Hydraulic motor with fail safe brake powered planetary gearbox driving external tooth 30” turntable bearing

Fabricated high-tensile steel octagon construction.
Operator’s platform open grate steel flooring and leg guard for safety

Twin swinger motor and gearboxes
Hydraulic oil tank heater
Light kits and over the road travel light bars
Ladder mounted chain boxes
Full range of attachments including continuous grapples

8,600 pounds with hydraulic oil and less attachments